Schneckenmotor *SMA* -wodtke *.nrg & ix*- Bronzelager This deflection plate rests on

This deflection plate rests on the side fireclays under the heat exchanger pipes

lower bronze bearing

we recommend also replacing the lower bearing

The additional electronics (ZE01) are required when replacing the "old" auger motor with the "newer" version in the above-mentioned pellet stoves with S1 or S2 controls

Round sealing cord Ø 12mm

Schneckenmotor *SMA* -wodtke *.nrg & ix*- Bronzelager This deflection plate rests onThis auger motor is a very good and inexpensive alternative to the original motor for wodtke pellet stoves from the *. nrg and ix* series. Not suitable for wodtke pellet stoves from the ivo.* series. When replacing a motor, we recommend also replacing the lower bearing. If the centering plate has grooves or damage, it should also be replaced. This is the only way to achieve smooth running of the auger and a long service life for all auger motors. Also